New, not remanufactured master cylinder. Reservoirs, caps and fluid sensors are supplied in the majority of units.
(1)(Rear -) Built for the (08) Subaru WRX... StopTech Stainless Steel Brake Lines provide a quicker pedal response, maintaining consistent brake pressure and precision brake modulation, especially during threshold braking. All StopTech Stainless Steel Brake Lines are manufactured to meet DOT Compliance Standards, and every line is 100% tested in-house to a pressure of 4500 psi. StopTech brake lines consist of a Teflon inner line, which is then covered with a layer of stainless steel woven braid. The Teflon tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. The stainless steel braid provides support for the Teflon and the weave is extremely durable against incidental impact and abrasion. Finally, StopTech brake lines are coated with a Clear Abrasion Resistant Cover for maximum protection against chaffing. All necessary brackets and fasteners are included with each line kit. Adding a set of StopTech Stainless Steel Brake Lines to your performance vehicle will provide an immediate improvement to brake performance and pedal feel from the very first stop. All StopTech Stainless Steel Brake Lines are DOT (United States Department of Transportation) compliant and 100% tested to a pressure of 4500 psi.
(4)This corrosion-resistant steel tubing is just like the original on most cars. All you need is a tubing bender and flaring tool and you're ready to create a replacement line or even a custom one.
Each kit contains:
Allstar 20 feet 3/16 inch Diameter Stainless Steel Coiled Tubing Brake Line is made from stainless steel coiled tubing and has a 3/16 inch diameter. It comes in a roll of 20 feet. It is a coiled, stainless steel brake line tubing and works great for building one piece custom brake lines without unions. The tubing is a 304 grade and double annealed for easy flaring and bending. The tubing does not include flare nuts. It is sold separately and is backed by a 90-day limited factory warranty and sold individually.
CENTRIC BRAKE HOSE -- Manufactured To The Highest Quality Standards To Meet Or Exceed OEM Specifications For Long Lasting Service And Designed To Be A Direct Replacement Of The Original Hose For Easy No Hassle Replacement
Location: Front
New, not remanufactured master cylinder. Reservoirs, caps and fluid sensors are supplied in the majority of units.
Techna-Fit's brake lines are made of the finest PTFE hose and permanently crimped-on zinc plated steel fittings. Techna-Fit's hose is made with an extruded PTFE core and a stainless steel wire braided cover. They reduce volumetric expansion giving you the reliability and safety you demand. The image shown is a generic kit with clear PVC cover each kit which will vary depending on the specific application.
Raybestos Brake Hose is designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking. This hose meets federal standards to ensure performance and safety, while providing longer hose life. It utilizes premium fittings to ensure a good hydraulic seal.
CENTRIC BRAKE HOSE -- Manufactured To The Highest Quality Standards To Meet Or Exceed OEM Specifications For Long Lasting Service And Designed To Be A Direct Replacement Of The Original Hose For Easy No Hassle Replacement
Location: Front Left
(1)
Affordable full line of hydraulic brake parts available for domestic and import vehicles based on Original Equipment (OE) design.
AAS Poly Vinyl Fluoride Coated Steel Line. Coating helps prevent corrosion and damage from road debris. 5/16" X 25' 16,000 psi Burst Pressure.
Premium Master Cylinder
New Master Cylinder
Affordable full line of hydraulic brake parts available for domestic and import vehicles based on Original Equipment (OE) design.
Direct replacement hydraulic brake hoses are designed to fit specific vehicle applications and positions. This ensures a great fit every time. New hose replacement is recommended as part of a complete brake repair for your vehicle.
Reman. A-1 CARDONE Master Cylinder This item has a core, the core cost of $16.00 (as of 01/02/2013 09:52 PST) has been added to the total price for this item.
Affordable full line of hydraulic brake parts available for domestic and import vehicles based on Original Equipment (OE) design.
Quality that meets or exceeds OE fit, form and function. Aluminum casting units designed to exact tolerances for proper fit and function. Castings protected by anodized coating to resist rust and corrosion. Testing that exposes seals to extreme temperature changes to ensure reliability in the harsh underhood environment. Exceptionally smooth bore that minimizes wear caused by every brake stroke resulting in longer service life.
(2)Cardone 10-5000MCB Remanufactured Master Cylinder [Automotive]
